Pneumatic breaker air pick
Product Description
♦ Instruction of YT27 ♦
1.The rock drill is a kind of high efficiency air leg rock drill machine.
2.Used for blasting holes and other drilling works in a quarries, railway construction, water conservancy construction and national defence project facility.
3. When it is matched with Model FY250 Oil reservoir and Model FT160A or FT160B Air-leg , it is suitable for wet drilling under various of rocks.
4.Global export.
♦ Safety of YT27 ♦
a. Ensure that technical safe practices are employed.
b. Pay attention to the position of steel wire ring clamp, if found it fray,change it.
c. Check steel wire ring clamp whether or not abrase, if so, change another at once.
d. Do not allow use low burning point and easy explosion lubricating oil.
Technical Data Sheet
| Weight | 27 kg | |
| Outside dimension(L×W×H) | 668×248×202mm | |
| Cylinder dia | 80mm | |
| Piston stroke | 60mm | |
| Impact energy | ≥75.5J | |
| Impact frequencey | ≥ 36.9Hz | |
| Air consumption | ≤83.3L/S | |
| Air pipe (inner dia) | 25mm | |
| Water pipe (inner dia) | 13mm | |
| Air pressure | 0.63MPa | |
| Water pressure | 0.3MPa | |
| Bore dia | 34-45mm | |
| Bore depth | 5m | |
| Shank dimensions(hex×length) | 22×108±1mm/ 25×108±1mm | |
| Model FY250B oil lubricator | ||
| Weight | 1.2kg | |
| Oil capacity | 0.25L | |
| Air leg | FT160A | FT160B |
| Weight | 17kg | 16 kg |
| Llength:max | 3006mm | 2526mm |
| min | 1668mm | 1428mm |
| Propulsion stroke | 1338mm | 1098 mm |
| Axis thrust (max) | 2000N | 2000N |